P-980 / P-980TRC

P 980
  1. P 1040 Trc A
  2. P 980 B
  3. P 1040 Trc C

Largeur de coupe

98" / 2489 mm

Puissance Recommandée

100 à 150 ch PdF

Hauteur de coupe 48" / 1219 mm
Diamètre du tambour 34" / 864 mm
Poids Rég. : 2093 lbs / 951 kg TRC : 2765 lbs / 1254 kg
Add to compare
Download the flyer

Options

CHOICE OF CHUTE

Psig 92104

PSIG-92104

Pcg 92104

PCG-92104

Prp 92104 2

PRP-92104-2

Prp 92104

PRP-92104

Pct 92104

PCT-92104

Pctc Indr

PCTC-INDR

Semi-industrial chute with greasable hinges and removable access panel, including hose support for deflector cylinder PSIG-92104
Quick attach industrial chute with greasable hinges and removable access panel, including hose support for deflector cylinder PCG-92104
  • 24" Extension for industrial chute
PRP-92104-2
  • 48" Extension for industrial chute
PRP-92104
Hydraulic telescopic industrial chute, a versatile chute for general use, including chute extension cylinders and hose support + hose support for deflector cylinder. Kit of two unidirectional restrictors RSP-1/16x10 ORB included. PCT-92104
  • Mounting kit for working light on telescopic chute.
PKL-IND92104
Hydraulic telescopic industrial chute with rounded deflector designed for truck loading, greasable hinges and access panel, including 2 extension cylinders and hose support and 2 deflector cylinders and hose support. Kit of two unidirectional restrictors RSP-1/16x10 ORB included. PCTC-INDR
  • Mounting kit for working light on telescopic chute.
PKL-INDR

CHOICE OF ADJUSTMENT FOR CHUTE DEFLECTOR

Cylinder 25TR08
  • Hose support for deflector cylinder
TSB-74104

HYDRAULIC MOTOR FOR CHUTE ROTATION

Hydraulic motor (included) MLH-315-R

HOSE KITS

Pkb

PKB-GR3

Pkb

PKB-GR3TRC

Hose kit for basic functions. Includes hydraulic hoses connecting the tractor oil outlets to the deflector adjustment cylinder and the chute rotation motor. * Installation not included. PKB-GR3
Kit for TRC models, also includes hoses for drum rotation motor. * Installation not included. PKB-GR3TRC
Kit for models with telescopic chute PCT-92104, also includes hoses for chute lifting cylinders. * Installation not included. PKB-GR3-T
Kit for TRC models with telescopic chute PCT-92104, also includes hoses for chute lifting cylinders. * Installation not included. PKB-GR3TRC-T
Kit for models with telescopic chute with round deflector PCTC-INDR, also includes hoses for chute lift cylinders and cylinder for round deflector adjustment. * Installation not included. PKB-GR3-TR
Kit for TRC models with telescopic chute with round deflector PCTC-INDR, also includes hoses for chute lift cylinders and cylinder for round deflector adjustment. * Installation not included. PKB-GR3TRC-TR

LATERAL BLADES

Cl 98104

CL-98104

Lateral blades, high quality steel 3/8" x 4" x 66" CL-98104

SCRAPER BLADE

Sit1gr2

SIT1-98

T1gr2

T1-98

Ss Tgr2

SST-98

Semi-industrial scraper blade, carbon steel 450, reversible 1/2" x 4" not sharpened SIT1-98
Industrial scraper blade, carbon steel 450, not reversible 1/2" x 6" sharpened T1-98
Stainless Steel scraper blade, reversible, 1/2" x 4" not sharpened SST-98

SKID SHOES

Phd

PHD-92104

Pshd

PSHD-92104

Pst

PST-92104

Industrial skid shoes with Hardox 450 soles PHD-92104
Skid shoes with ROCKTEC soles PSHD-92104
Skid shoes with stainless steel soles PST-92104

FULL FLIGHT SPIKED MAIN AUGER

Vi Pnew2

VIP2-980

Full flight spiked main auger VIP2-980

UPPER AUGER 14" DIAMETER

Upper auger 14" diameter, including accessories VS2-980

SPEED REDUCER

Prh 30 M 2

PRH-30M-2

Prh 25 M 2

PRH-25M-2

Pr3 G200 2

PR3G200-2

Speed reducer 1000/555 RPM - 220 HP at 1000 RPM - 3 gears - shafts 7 1/16" c/c PRH-30M-2
Drop box 1000/540 RPM. Two choices of input shafts : Reducer inverter 225 HP at 1000 RPM 2/3 gears - shafts 6 3/4" c/c or reducer only 175 HP at 1000 RPM 3/3 gears - shafts 8" c/c PRH-25M-2
Reducer 1000/555 (200 HP at 1000 RPM) 3 gears - 8" c/c PR3G200-2

CHOICE OF POWER TAKE-OFF (PTO)

T80 PTO 1 3/8"-6 & 1 3/4"-20 (540 RPM) 9225
T80 PTO 1 3/8"-21 & 1 3/4"-20 (1000 RPM) 9569
T80 PTO 1 3/4"-20 & 1 3/4"-20 (1000 RPM) 9569-1
V80 Multilobe PTO 1 3/8"-6 & 1 3/4"-20 (540 RPM) 9225-V
V80 Multilobe PTO 1 3/8"-21 & 1 3/4"-20 (1000 RPM) 9569-V
T90 PTO 1 3/8"-6 & 1 3/4"-20 (540 RPM) 9475
T90 PTO 1 3/8"-21 & 1 3/4"-20 (1000 RPM) 9475-1
T90 PTO 1 3/4"-20 & 1 3/4"-20 (1000 RPM) 9475-2
V90 Multilobe PTO 1 3/8"-6 & 1 3/4"-20 (540 RPM) 9598
V90 Multilobe PTO 1 3/8"-21 & 1 3/4"-20 (1000 RPM) 9599
V90 Multilobe PTO 1 3/4"-20 & 1 3/4"-20 (1000 RPM) 9604

HYDRAULIC MOTOR FOR ROTARY DRUM (TRC MODELS ONLY)

Hydraulic motor (included on TRC model) MLH-315-R

IMPELLER HOUSING

Impeller housing contour made from Hardox 450 steel in lieu of regular grade steel TBHD-3415
Impeller housing contour made from Hardox 450 steel in lieu of regular grade steel (for TRC model) TBHD-3415TRC

RUBBER DEFLECTOR FLAP

Rubber deflector flap located from the top of the frame to the auger. Reduces projections. TL-98108

CHOICE OF COLORS

Red PRONOVOST
Blue PG3-02
Orange PG3-04
Yellow INDUSTRIAL PG3-06
Green PG3-07
Black PG3-10

Other recommended products

Additional Information

HYDRAULIC DRIVEN

It is possible to use this snowblower with hydraulic drive. The hydraulic oil flow at a specific pressure will guide you in to the choice of the snowblower.

Contact your Pronovost dealer to obtain a quote for your specific requirements.

Hyd22

HYDRAULIC WHEELS

Hydraulic wheels permit using the snowblower at a constant height from the ground without scraping it.

  • Practical to avoid blowing gravel.
  • Permit snowblowing on a grassy surface while avoiding direct contact of the blade with the ground.

Contact your Pronovost dealer to obtain a quote for your specific requirements.

*Available only on a new snowblower made in production.

Roues Wheels 1

Ice scraper blade for snowblowers

The ice scraper blade is installed under the snowblower, easily and requires no tool.
Scrape icy surfaces to create a grooved finich that increases grip.

Its design requires no additional oil outlet or any modification to the snowblower.
When required, the ice scraper blade must be assembled to the snowblower and then disassembled after use.

Couteauglace 1

Hydraulic flotation ski for snowblowers

The hydraulic flotation ski allows you to use the snowblower at a constant height above the ground, without scraping it.

Allows you to compact a hard and uniform snow bottom in the gravel entrances while preventing gravel from entering the snowblower. Allows you to blow on a grassy surface while avoiding contact of the snowblower blade with the ground.

Skiflottaison 25

Complete specifications

HP recommended (min. - max.) 100 to 150 HP PTO
Working width 98" / 2489 mm
Cutting height 48" / 1219 mm
Hitch category 2 - 34 1/2" / 876 mm c/c
Cutting height of lateral blades Opt. CL : 56 1/2" / 1435 mm
Height with telescopic chute PCT-92104 : 116" / 2946 mm closed, 147" / 3734 mm extended PCTC-INDR : 120" / 3048 mm closed, 152" / 3861 mm extended
Height with telescopic chute (TRC model) PCT-92104 : 118" / 2997 mm closed, 149" / 3785 mm extended PCTC-INDR : 122" / 3099 mm closed, 154" / 3912 mm extended
Impeller diameter 34" / 864 mm
Depth of drum 15" / 381 mm
Impeller housing contour : High quality steel Included
Impeller housing contour : Hardox 450 Opt.
Number of impeller blades 6
Impeller shaft diameter 2" / 51 mm
Height of impeller center 21 1/2" / 546 mm
Rotor RPM 540 RPM
Required RPM for the tractor PTO 540 RPM Opt. 1000 RPM
Number of augers 1 opt. 2
Main auger diameter 26" / 660 mm
Upper auger diameter Opt. - 14" / 355 mm
Bearing / ductile iron housing 1 1/2" / 38 mm
Drive chain - Main auger 100
Number of shear bolts 1 for impeller + 1 for auger
Drum rotation for hydraulic motor (TRC only) Std.
Reducer 1000/555 RPM - 220 HP at 1000 RPM - 3 gears - shafts 7 1/16" c/c Opt.
1000/540 RPM drop box with two choices of input shafts Opt.
Drive shaft included (optional) T80 (V80, T90 &V90)
Lateral blades - High quality steel Opt. CL : 3/8" x 4"
Scraper blade - High quality steel Included 1/2" x 4" reversible, not sharpened
Scraper blade - Semi-industrial made of Hardox 450 Opt. 1/2" x 4" reversible, not sharpened
Scraper blade - Industrial made of Hardox 450 Opt. 1/2" x 6" not reversible, sharpened
Scraper blade - Tivar Opt. 1" thickness, not reversible, not sharpened
Scraper blade - Stainless steel Opt. 1/2" x 4" reversible, not sharpened
Adjustable skid shoes - Quick adjustment high quality steel Included
Adjustable skid shoes - Quick adjustment Hardox 450 Opt.
Adjustable skid shoes - Quick adjustment Rocktec Opt.
Adjustable skid shoes - Quick adjustment stainless steel Opt.
Full flight main auger (industrial) Opt.
Chute - Semi-industrial with greasable hinges and removable access panel Opt.
Chute - Industrial quick attach Opt.
Chute - 24" or 48" extension Opt.
Chute - Telescopic including extension cylinders Opt.
Chute - Telescopic with rounded deflector including extension and deflector cylinders Opt.
Chute rotation system - Hydraulic motor kit (motor not included) Included
Chute rotation maximum angle - Hydraulic motor rotation 305°
Antifriction for chute Included : ring
Deflector - Hydraulic cylinder Opt.
Color Included : Red Pronovost Opt. : Choice of 5 colors
Storage support Included
Weight including chute 2093 lbs / 951 kg
Weight including chute (TRC model) 2765 lbs / 1254 kg

Design and specifications subject to change without notice.

Videos

No video for this product

Photo gallery

  • P 1040 Trc G01

    Model P-1040TRC

  • P 1040 Trc G02

    Model P-1040TRC

  • P 1020 G04

    Model P-1020TRC

  • P 1040 Trc G05

    Skid shoe on model P-1040TRC

  • P 1040 Trc G03

    Model P-1040TRC

  • P 1040 Trc G01
  • P 1040 Trc G02
  • P 1020 G04
  • P 1040 Trc G05
  • P 1040 Trc G03