P-620

P 720
  1. P 720 A
  2. Groupe1 B
  3. Groupe1 C

Working width

62" / 1574 mm

HP recommended

20 to 30 HP PTO

Cutting height 30" / 762 mm
Drum diameter 24" / 609 mm
Weight 649 lbs / 290 kg
Add to compare
Download the flyer

Options

CHOICE OF CHUTE

Psig 5472

PSIG-5472

Pc3 C Gr1.5

PC3C-GR1

Semi-industrial chute with greasable hinges and access panel (removable) PSIG-5472
3-Deflector semi-industrial chute with greasable hinges and removable access panel. PC3C-GR1

CHOICE OF ADJUSTMENT FOR CHUTE DEFLECTOR

Manual telescopic tube T-4864
Hydraulic cylinder 25TR04

HYDRAULIC MOTOR FOR CHUTE ROTATION

Hydraulic motor for pump with less than 10 GPM (with cushion valve) MLH-125
  • Kit of two unidirectional restrictors
RSP-1/16x10 ORB
Hydraulic motor for pump with less than 12 GPM (with cushion valve and unidirectional restrictors) MLH-250-R

HOSE KITS

Pkb

PKB-GR1

Hose kit for basic functions. Includes hydraulic hoses connecting the tractor oil outlets to the deflector adjustment cylinder and the chute rotation motor. * Installation not included. PKB-GR1

LATERAL BLADES

Cl 4872

CL-4872

Kit of 2 lateral blades, standard steel (3/8" x 2 1/2" x 39 1/2") CL-4872

SCRAPER BLADE

Sit1gr1

SIT1-62

T Vgr1

TV-62

Ss Tgr1

SST-62

Semi-industrial scraper blade, carbon steel 450, not reversible 1/2" x 3" not sharpened SIT1-62
Tivar scraper blade, including mounting kit TV-62
Stainless Steel scraper blade, not reversible, 1/2" x 3" not sharpened SST-62

SKID SHOES

Phd

PHD-4872

Pst

PST-4872

Industrial skid shoes with Hardox 450 soles PHD-4872
Skid shoes with stainless steel soles PST-4872

SPEED ACCELERATOR

Pacc 5462

PACC-5462

Accelerator 540/756 (45 HP) PACC-5462

RUBBER DEFLECTOR FLAP

Rubber deflector flap located from the top of the frame to the auger. Reduces projections. TL-5480

CHOICE OF COLORS

Red PRONOVOST
Blue PG1-02
Orange PG1-04
Yellow INDUSTRIAL PG1-06
Green PG1-07
Black PG1-10

Other recommended products

Additional Information

HYDRAULIC DRIVEN

It is possible to use this snowblower with hydraulic drive. The hydraulic oil flow at a specific pressure will guide you in to the choice of the snowblower.

Contact your Pronovost dealer to obtain a quote for your specific requirements.

Hyd22

HYDRAULIC WHEELS

Hydraulic wheels permit using the snowblower at a constant height from the ground without scraping it.

  • Practical to avoid blowing gravel.
  • Permit snowblowing on a grassy surface while avoiding direct contact of the blade with the ground.

Contact your Pronovost dealer to obtain a quote for your specific requirements.

*Available only on a new snowblower made in production.

Roues Wheels 1

Ice scraper blade for snowblowers

The ice scraper blade is installed under the snowblower, easily and requires no tool.
Scrape icy surfaces to create a grooved finich that increases grip.

Its design requires no additional oil outlet or any modification to the snowblower.
When required, the ice scraper blade must be assembled to the snowblower and then disassembled after use.

Couteauglace 1

Hydraulic flotation ski for snowblowers

The hydraulic flotation ski allows you to use the snowblower at a constant height above the ground, without scraping it.

Allows you to compact a hard and uniform snow bottom in the gravel entrances while preventing gravel from entering the snowblower. Allows you to blow on a grassy surface while avoiding contact of the snowblower blade with the ground.

Skiflottaison 25

Complete specifications

HP recommended (min. - max.) 20 to 30 HP PTO
Working width 62" / 1574 mm
Cutting height 30" / 762 mm
Hitch category 1
Cutting height of lateral blades Opt. CL : 39 1/2" / 1003 mm
Impeller diameter 24" / 609 mm
Depth of drum 9" / 229 mm
Impeller housing contour : High quality steel Inclus
Number of impeller blades 4
Impeller shaft diameter 1 1/4" / 32 mm
Height of impeller center 15" / 381 mm
Rotor RPM 540 RPM
Required RPM for the tractor PTO 540 RPM
Number of augers 1
Main auger diameter 16" / 406 mm
Bearing / ductile iron housing 1" / 25 mm
Drive chain - Main auger 50
Number of shear bolts 1 for impeller + 1 for auger
Accelerator Opt. 540/756 RPM 25 HP
Drive shaft included (optional) T20
Lateral blades - High quality steel Opt. CL : 3/8" x 2 1/2"
Scraper blade - High quality steel Included 3/8" x 2 1/2" not reversible, not sharpened
Scraper blade - Semi-industrial made of Hardox 450 Opt. 1/2" x 3" not reversible
Scraper blade - Tivar Opt. 1" thickness, not reversible, not sharpened
Scraper blade - Stainless steel Opt. 1/2" x 3" not reversible, not sharpened
Adjustable skid shoes - Quick adjustment high quality steel Included
Adjustable skid shoes - Quick adjustment Hardox 450 Opt.
Adjustable skid shoes - Quick adjustment stainless steel Opt.
Chute - Semi-industrial with greasable hinges and removable access panel Opt.
Chute rotation system - Hydraulic motor kit (motor not included) Inclus
Chute rotation maximum angle - Hydraulic motor rotation 270° to 345° adjustable
Antifriction for chute Included : ring
Deflector - Manual Opt.
Deflector - Hydraulic cylinder Opt.
Color Included : Red Pronovost Opt. : Choce of 5 colors
Storage support Included
Weight including chute 649 lbs / 290 kg

Design and specification subject to change without notice.

Videos

No video for this product

Photo gallery

  • Groupe1 G03

    Manual chute rotation kit

  • Groupe1 G04

    Quick adjust skid shoes

  • Groupe1 G06

    Model P-720

  • Groupe1 G07

    Model P-720

  • P 720 74 G10

    Model P-720-74 with semi-industrial chute and deflector cylinder, with front 3 point hitch

  • P 720 80 G08

    Model P-720-80 with front 3 point hitch

  • Rotor4 G05

    4 blades impeller

  • P 720
  • Groupe1 01
  • Groupe1 02
  • Groupe1 03
  • Groupe1 G03
  • Groupe1 G04
  • Groupe1 G06
  • Groupe1 G07
  • P 720 74 G10
  • P 720 80 G08
  • Rotor4 G05
  • P 720
  • Groupe1 01
  • Groupe1 02
  • Groupe1 03